Installing a new roof means the gutters likely need some attention as well. As any good residential roofing company can explain, roofs and gutters work together, and when mistakes are made with either, it can affect the condition of the roof. To ensure that roofer services are performed correctly, homeowners can watch for some of the following common mistakes, or discuss these gutter concerns with an experienced residential roof company beforehand to ensure the best roofing job possible.
Require A Drip Edge
A drip edge or roof flashing is a metal strip that connects to roof fascia, and extends a short distance under the edge of roofing shingles. The purpose of this edging is to protect the edge of the shingles, drawing water away from them, down the drip edge, and into the gutter. Some roofing services companies skimp when it comes to this detail, and do not install this simple, but very important piece of roofing. As a result, roofs can see a great deal of water damage over time. Roof flashing is required in some states, as it also provides a secure place to fasten shingle edges to a roof, but in other states, it is not required. In either case, homeowners should ensure that the company providing the roofing services for their home put on a drip edge for the best protection and longevity of their roof.
Ensure Shingles Do Not Overhang Roof
Often, in order to to get away from installing a drip edge, some roofing services will instead install shingles so they hang a few inches past the actual roof, allowing water to drip off the edge of the shingles. Not only is this not an acceptable replacement for a drip edge, since water can still seep under the edges of shingles and reach the facia, but it frequently causes water to drip over the gutters, rather than into them. Gutters play an important part in preventing water damage to the roof, the sides of the house, and the ground surrounding the house, so water rolling over them serves no purpose.
Sufficient Gutter Size and Downspouts
Since gutters collect water as it rolls down off the roof when it rains, it stands to reason that the larger the roofing surface, the more water a particular roof will shed. Therefore, the larger the roof, the larger the gutter size should be in order to properly handle the volume of water that could flow into the gutters during the heaviest rains. Another way to accommodate larger roofs without greatly increasing the size of the gutters, is with the addition of more downspouts and wider downspout connectors; both of which will help in keeping gutters from backing up, and allowing these systems to handle larger volumes of water.
Proper Gutter Positioning Essential
Gutters positioned too high or low in comparison to the roof edge, can reduce the effectiveness of the gutter system. For water to be allowed to flow freely into the gutter and not over it, or to prevent roof edges from becoming submerged by full gutters, these systems should be positioned so they are a few inches below the edge of the drip edge. When properly positioned, anything rolling off the roof will flow into the gutter, and not over it.
With the proper roofer services, and taking other things into consideration, such as gutter height and size, drip edges, and shingle overhang, homeowners can be certain their roof will not suffer any damage caused by using improper techniques. One recommendation is to discuss these issues with roofing services companies who work on residences, to ensure they understand the importance of these systems, and will not make any of the common roofing and gutter mistakes. An experienced residential roof company will know the significance of these mistakes, and avoid them at all costs, while providing the best roof installation service around!